Kiurlab RH- - Deironizer 500ml

rh- paint deironizer by kiurlab – effective removal of metallic contamination from vehicle paintwork

rh- deironizer is a specialized cleaning product designed to remove metal-based contaminants from automotive paint. contaminants such as iron deposits, rust, or brake dust caused by brake disc wear can accumulate on the paint surface. these particles may permanently bond to the paint, causing unsightly contamination (typically visible as characteristic orange spots) and potentially damaging the clear coat. conventional cleaning products are usually only partially effective against this type of contamination. in such cases, rh- deironizer is the best solution, as it chemically reacts with, dissolves, and removes metallic contamination, restoring paint purity and a flawless appearance.

rh- deironizer – advanced formula for removing metallic impurities from paint

rh- deironizer by kiurlab is a highly effective product that removes metallic impurities through the deironization process. when applied to paintwork, a characteristic “bleeding” effect appears, indicating the presence of metal contaminants. the red coloration is visible proof of the chemical reaction between the product and metallic particles, resulting in effective removal from the paint surface.

benefits of kiurlab rh- deironizer

• fast reaction time – the “bleeding” effect can be observed within seconds after application
• optimized consistency – the viscosity allows the product to adhere well and remain on the paint surface
• paint safe – the refined formula is safe for conventional, metallic, pearlescent paints and paint protected with coatings

how to use kiurlab rh- paint deironizer

rh- deironizer is a professional-use product. always read the instructions on the packaging before use. ensure good ventilation and use personal protective equipment such as gloves, a mask, and safety goggles.

usage recommendations

• make sure the paint surface is cool
• shake the bottle well before use
• test the product on an inconspicuous area
• do not apply to bare metal parts such as brake discs or tow bars; protect them if necessary

application

• spray the product onto the surface from a distance of approx. 10 cm
• use a brush for hard-to-reach areas
• allow approx. 5 minutes for the “bleeding” effect to appear
• rinse thoroughly with cold water
• repeat if necessary